Category Archives: greenhouse

Features of Allergic Harvest PC

The thickness of this material is 4 mm.

If you want, you can increase the period of the construction to 6 metres or more. To try it, it’s enough to attach a two-meter extension. When picking a drawing, look closely at the space between the arches. This figure needs to be 65 cm, and that’s the most appropriate duration for the specified thickness of the material. The width of the doors based on the manufacturer’s drawing is 90 cm.

Before building a polycarbonate greenhouse, then it is necessary to choose a spot because of the location. If that is done correctly, you can provide yourself with a crop of fresh veggies for the whole calendar year.

The place for your future greenhouse is marked immediately at the preparation of this garden plot. To be able to melt the snow at the positioning of their greenhouse as early as possible, the very best point on the site will be a small elevation. Moreover, in this location will not need to be worried about large humidity as soil and atmosphere in the construction.

Assemble a polycarbonate greenhouse on a raised site – intends to take care of the best temperature inside.

When it is not possible to put a greenhouse in an elevated position, you’ll have to pour a layer of fine crushed stone around 20 cm and the exact same layer of fertile land to create seedbeds.

Before building a greenhouse on your garden plot, you should also think about where and how this construction will be installed. To begin with, you must choose a place for this. The greenhouse ought to be found in a metropolitan region no less than a couple meters away from homes, barns and other structures.

How to Put in a greenhouse Based on the Surfaces of the Planet

Be sure to measure the soil surface – it’s ideal to remove the top layer. This can also get rid of weed seeds. And for simplicity of work, remove the dirt in a place that’s about a meter wider on each side of the rectangle that you want.

In addition, it is worth considering having a foundation. As producers state, now most greenhouses do not need it, especially if they (greenhouses) are utilized just in the spring and summer time. However, experienced gardeners still suggest making at least an elementary basis from a bar. It is very simple – it’s enough to connect with each other using metal corners and screws four parts of timber using a cross-section of at least 10 * 10 cm. The size of such a base ought to be equivalent to the base of their upcoming greenhouse.

Simple bar foundation

You might also make a strip foundation of concrete. He’s more dependable than a pub base, but demands greater financial and labour expenses. Incidentally, the rainwater, which will be used in the winter, with no and don’t do without it at all.

Stages of the creation of a strip base: a schematic representation

Many gidpostroy.ru manufacturers advise to put in greenhouse structures without even building a base. For this intention, they equip the framework with special T-shaped legs, so the structure was securely fixed. But, as practice shows, it’s still necessary to build a foundation: therefore and the basis will be more rigorously fixed and also the components of the basis in touch with the ground, will be kept much longer in its initial condition.

The most important issue is to care for the material with special agents to protect the wood from moisture. The substance is generally installed on concrete blocks that are dug into the ground. To get a six-meter structure, they want 10 pieces: four on each side and one in the middle of the ends.

Before you do the greenhouse , you will need to pick the ideal place for it. It has to be an even website, so the frame was found evenly, without distortions. It needs to be sunny and never obscured by buildings or trees.